Intellitec Slideout Control Module 300 #00-00525-300

$101.34

This control is no longer available. It is repairable. Please call 844-9RV-PART for details.

Out of stock

SKU: 31-0000525300 Category:

Description

Intellitec Slideout Control Module 300 #00-00525-300

This control is no longer available. It is repairable. Please call 844-9RV-PART for details.  Intellitec’s Slide-Out Controllers are a part of the expanding family of the MONOPLEX™ System. These controllers are designed to control the operation of a slide-out room electrical mechanism. The controller automatically stops the slide-out when it reaches it’s inner or outer limit by sensing the current drawn by the motor. This eliminiates the need for the owner to hold the switch in the “”ON”” position for the entire extend/retract cycle, or installation of the limit switches and associated wiring during installation. By utilizing MONOPLEX™ System switching, only one wire and a ground lead are needed to connect to multiple switches, each with it’s own indicator. The control unit can be mounted near the motor mechanism to ease installation and eliminate long heavy gauge wire runs. To operate the room, the owner would simply press the button. The indicator light will come on and the slide will move out. When the slide-out reaches it’s outer most limit, the unit will sense the rise in current and switch off the power to the slide-out motor and indicator light. To move the room back again, the owner will again push the button, the indicator will come on and the room will move in. When the slide-out reaches it’s inner most position, the controller will sense the rise in current and will shut off power to the motor and indicator light. If, at any time during the operation of the slide-out, the owner wants to stop the room, he can push the button and it will stop. Pressing the button again will start in the reverse direction. Slideout room control module 300 This will be the replacement for Intellitec # 00-00336-100 Also used to replace 00-00318-000, 00-00367-000 and 00-00346-000 in the future. A slide out room controller w/ memory Lock, stop adjustment approx 6.375″ W x 3.75″ T x 1.625″ D Wall mount Connects by 8 male spade connectors on module Specifications: Operating Voltage 10 – 16 VDC Current Range 4 – 14 Amps Current carry capabilities Continuous Current 20 Amps Stall Current Threshold 20 – 50 Amps Standby Draw 2 milliamps Operating Temperature -40°C to +85°C -40°F to +185°F Operating Environment Protected from direct weather. Warranty Terms: 1 Year

Additional information

Weight 1.25 lbs
clean_url

taxable