Limited availability.. Call 1-844-9RV-PART for details.
This is a polar white housing momentary MPX switch labeled for slide out room controller #00-00193-000. Intellitecs Slide Out Controller are a part of the expanding family of the MONOPLEX™ System. These controllers are designed to control the operation of a slide out room electrical mechanism. The controller automatically stops the slide out when it reaches its inner or outer limit by sensing the current drawn by the motor. This eliminiates the need for the owner to hold the switch in the ON position for the entire extended/retract cycle, or installation of the limit switches and associated wiring during installation. By utilizing MONOPLEX™ System switching, only one wire and a ground lead are needed to connect to multiple switches, each with its own indicator. The control unit can be mounted near the motor mechanism to ease installation and elimate long heavy gauge wire runs. To operate the room, the owner would simply press the button. The indicator light will come on and the slide will move out. When the slide out reaches its outer most limit, the unit will sense the rise in current and switch off the power to the slide out motor and indicator light. To move the room back again, the owner will again push the button, the indicator will come on and the room will move in. When the slide out reaches its inner most position, the controller will sense the rise in current and will shut off power to the motor and indicator light. If, at any time during the operation of the slide out, the owner wants to stop the room, he can push the button and it will stop. Pressing the button again will start in the reverse direction. Specifications: Operating Voltage 10 16 VDC Current Range 8 48 Amps Current carry capabilities Continuous Current 20 Amps Stall Current Threshold 20 50 Amps Standby Draw 2 milliamps Operating Temperature -40°C to +85°C -40°F to +185°F Operating Environment Protected from direct weather. Warranty Terms: 1 Year 00-00183-012