Description
RV Water System 1 Litre Accumulator Tank 30573-0000
Jabsco 12573-3000 Replaced by Jabsco 30573-0000
Was 81-12573000
Fresh Water Accumulator Tank; 33 Ounce Tank Volume (21.5 Ounce Working Water Volume); 4-3/4 Inch Diameter x 13-1/4 Inch Height; 1/2 Inch Hose Barb And 1/2 Inch Threaded Hose Fitting; Maximum Pressure Up To 125 PSI/ Pre-Charged Pressure Up To 10 PSI; Plastic
This Accumulator Tank is intended for installation in any pumped water system controlled by a pressure switch. For example, PAR-MATE 2.5 or any Jabsco pressure pumps as found in boats, RV’s, motor caravans, coaches and similar applications. The Accumulator Tank smooth’s water flow and reduces on/off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system. The even flow of water gives better control of hot water temperature especially noticeable with instantaneous gas water heaters and with showers. The reduced on/off cycling reduces noise from the pump motor, and from shock pressures (pipe hammer). It also reduces battery drain, and gives longer pump life.
Diameter (IN): 4-3/4 Inch
Volume Capacity: 33 Ounce
Inlet Size: 1/2 Inch
Inlet Connection Type: Hose Barb
Outlet Size: 1/2 Inch
Outlet Connection Type: Threaded Hose
Length (IN): Not Applicable
Width (IN): Not Applicable
Height (IN): 13-1/4 Inch
Maximum Pressure Rating (PSI): 125 Pounds Per Square Inch
Material: Plastic
Features
Smoother And More Even Flow
Quieter Water System
Better Temperature Control
Longer Pump Life. Lower Battery Drain
Simply Fitted To New Or Existing Systems
Compact Size
Tank: Hygienic, Light, Compact, Impact And Pressure Resistant Plastic Construction
Limited 1 Year Warranty
Accumulator Tank Smooth flow, quieter water systems. Must be mounted vertically and regularly drained. Better control of hot water temperatures. Simply fitted to new or existing systems. Longer pump life, lower battery drain. Complete with Tee-piece. Dimensions: 5″D x 13.125″H
