Description
This product is no longer available. It has been superceded by several other products depending on your situation.
Replacement Components for existing systems:
The following Intellitec Battery Disconnect parts have been obsoleted but have replacement options. The
table below shows the required replacement switch panel and associated harness necessary to convert from
the existing batter disconnect panel to the current:
Obsolete Switch Panel Replacement Switch Panel New Wire Harness Adapter Wire Harness
01‐00066‐000 / ‐004 replace with 00‐01114‐000 11‐00064‐000 11‐00064‐001
01‐00066‐001 / ‐005 00‐01090‐100 11‐01090‐100 11‐01090‐103
01‐00066‐002 / ‐006 00‐01090‐000 11‐01090‐001 11‐01090‐003
01‐00066‐003 / ‐007 00‐01090‐000 11‐01090‐001 11‐01090‐003
*New Wire Harness is only necessary if removing previously installed wire harness. If existing wire harness is still functional then an adapter wire
harness should be used.
Meet the remote battery disconnect that makes sure a RVs batteries are alive, well and ready for the road. Battery Disconnect is an easy-to-install system that will allow RV owners to disconnect coach and chassis batteries with just the touch of a switch. With Battery Disconnect, the owner can be sure the batteries are disconnected when his RV is not in use or being stored off-season. It is conveniently located inside the RV, and its all remote. The heart of the Battery Disconnect system is another Intellitec invention. A latching relay, capable of carrying heavy coach currents, draws power only when switched on or off; yet, it requires no power to stay open or closed. This sturdy relay is sealed against the environment and is designed for the toughest use. Unwanted battery drain during storage, or when the RV is not in use, is not the only customer benefit of Battery Disconnect. Batteries are protected from overcharging when the RV is plugged in for an extended time. Battery Disconnect also prevents shorts or fire hazard while working on the 12 Volt electrical system. Easy Installation Installation detail is straightforward, easy-to-follow, and is simple enough that your customers can install it themselves. Specifications Intended for remote disconnect of both coach and chassis batteries of motor homes. The BD2 system requires two relay, 25′ of cable, monitor panel with two ON/OFF indicators, and ignition interlock to prevent disconnection while engine is running. Relay Actuation Voltage 10.5 Volts minimum Continuous carry current 100 Amps maximum Short term carry current 500 Amps 30 seconds maximum Replaces #84-00069-003 intended for remote disconnect of both coach and chassis batteries of motorhomes. and monitor panel with two on-off indicators and ignition interlock to prevent disconnection while engine is running. Needs 11-00139-000 cable w/end connectors and 01-00055-000 battery disconnect relay. 3hx5wx1d Warranty Terms: 1 Year
