Description
Atwood 80412 Hdtcj, 4 Jacks Pur Wht 1,37
Atwood 80412 Electric HD Truck Camper Corner Jacks
Atwood 80412 Electric HD Truck Camper Corner Jacks – Switches
It’s never been easier to load and unload your slide-in truck camper. Eliminate the hassle of moving from jack to jack while only cranking a couple inches at a time. The extra large footpads provide greater stability and reduced sway. These jacks are permanently lubricated for minimal maintenance. Heavy duty steel tubing is powder coated for a long lasting, scratch resistant finish.
Operation – These electric jacks need 12-volt automotive battery power to operate. If no power is available, use the manual override emergency cranks. These jacks are operated by switches on the jacks. Both front jacks are operated by the driver side front jack, the rear jacks are operated by the driver side rear jack. The switches on the jacks will allow you to extend or retract individual jacks or all four jacks, if operated with two people.
Specs:
Support Capacity (Set of 4): 5,000 lbs.
Collapsed Size = 56″, Extended Size = 89.5″, Total Lift = 33.5″
This Kit Includes
1x 80440 Electric HD Camper Jack w/ Switches
1x 80442 Electric HD Camper Jack
1x 80441 Electric HD Camper Jack w/ Switches
1x 80443 Electric HD Camper Jack
Note: Brackets and crank handles are not included. Brackets are only necessary if your camper doesn’t have existing Atwood Jack Brackets mounted on the camper. Crank handles can be purchased in the drop down above.
Atwood Mobile Products was founded in 1909 as the Atwood Vacuum Machine Company by brothers James and Seth Atwood.
They expanded the business by developing the “universal rubber door bumper” which put an end to door rattles in early automobiles. The Atwood brothers continued their success in the burgeoning auto business by manufacturing door hinges and seat adjusters.
As travel trailers became popular, Atwood entered the RV market with a trailer coupler in 1936, the screw-type trailer jack in 1949, and surge brakes in 1960. The company grew with strategic purchases of the Bowen Company in 1964, an RV water heater manufacturer; Wedgewood in the mid 1980s, with a complete line of gas ranges and cook tops; and Hydroflame furnaces in 1993—making gas appliances the company’s core product line. In 2010, they enhanced their RV product range by acquiring Fan-Tastic Vent™, a highly recognized manufacturer of performance air-exchange systems. Atwood energized this product line by developing the Ultra Breeze Vent Cover, EZ-Breeze vent, and modernized controls.
In 2014 Dometic purchased Atwood Mobile Products to complement and bolster Dometic’s robust product line.
